- Approvals | Accreditations
- |
- EAPCET / ECET CODE : SRKR
- |
- M.TECH CODE : SRKR1
- |
- BBA CODE : 17086
- |
- Contact Us
- Home
- Mechanical Research
RESEARCH
- Department faculty is actively engaged in carrying out sponsored research work with funding from many National funding agencies which include Department of Science & Technology (DST), University Grants Commission (UGC), and All India Council for Technical Education (AICTE) and Institute of Engineers (India).
- During the last few years 14 sponsored research projects with an outlay of Rs 85 Lakhs projects were undertaken.
- Department faculty takes up many industrial consultancy projects annually. Some of the notable sponsors of consultancy projects in recent years include BOSCH, MJB Motors Pvt. Ltd., PMI Toolings, and ASCAR etc.
| S.No. | Project Investigators | Title of Project | Funding Agency | Sanctioned Amount (Rs.) | Project Duration | Status |
|---|---|---|---|---|---|---|
| 1 | Dr. K. Brahma Raju | Development of multilayer thin film sensors for practical monitoring of weld stress | AICTE (RPS) | 1510000 | 2012-2017 | completed |
| 2 | Dr. A. Bala Krishna | Development of XML-Ontology tool for STEP geometric data | AICTE (RPS) | 1186667 | 2013-2017 | completed |
| 3 | Dr. P. Rama Murty Raju & Dr.S. Rajesh | Experimental investigation of fatigue behavior of nano metal matrix composites | AICTE (RPS) | 820000 | 2013-2017 | completed |
| 4 | Dr. K. Bala Krishna | Development of XML-Ontology tool for STEP NC data | UGC | 535000 | 2014-2017 | completed |
| 5 | Dr.K.Brahma Raju & Dr.V.Durga Prasad Rao | Development of computer Interfaced ICaboratory Engines l | AICTE (MODROBS) | 1275000 | 2019-2020 | completed |
| 6 | Dr. A. Bala Krishna | Stragetic Methods and Tools for Product Development | AICTE (FDP) | 566067 | 2020-2021 | completed |
| 7 | Dr.K.Brahma Raju & K.Tarun kumar | Underwater Drone for Welding | MSME-Innovation Scheme-(AICTE) | 350000 | 2021-2022 | 01 Year (Ongoing) |
| 8 | Dr. CH. RamaBadri Raju | Science Technology and Innovation Driven Inland Aquaculture Hub for Bhimavaram Suburbs | DST | 9600713 | 2025-2028 | working in progress |
| S.No. | Name | 2024-25 | 2023-24 | 2022-23 | 2021-22 | 2020-21 | 2019-20 | zTotal |
|---|---|---|---|---|---|---|---|---|
| 1 | Dr. K. Brahma Raju | - | 4 | - | 2 | 2 | 8 | 16 |
| 2 | Dr. V. Durga Prasad Rao | - | 2 | - | 1 | 1 | 2 | 6 |
| 3 | Dr. P. Ramamurthy Raju | - | 3 | 2 | 3 | 2 | 1 | 11 |
| 4 | Dr. K. Suresh Babu | - | 0 | - | - | - | - | 0 |
| 5 | Dr. K.V.M. Krishnam Raju | - | 2 | - | - | - | - | 2 |
| 6 | Dr. V.K. Viswanadha Raju | - | 1 | - | - | - | 1 | 2 |
| 7 | Dr. S. Rajesh | - | 2 | 1 | 4 | 1 | 1 | 9 |
| 8 | Dr. K. Sitarama Raju | - | 4 | - | - | - | 1 | 5 |
| 9 | Dr. A. Balakrishna | - | 1 | - | - | 3 | 2 | 6 |
| 10 | Sri. Ch. Srinivas | - | 0 | - | - | - | - | 0 |
| 11 | Sri. Ch. Gopala Raju | - | 0 | - | - | - | - | 0 |
| 12 | Sri. P.V.R.S. Padma Raju | - | 0 | - | - | - | - | 0 |
| 13 | Sri. G. Chatapathi Raju | - | 0 | - | - | - | - | 0 |
| 14 | Dr. Ch. Rama Bhadri Raju | 2 | 7 | 4 | 6 | 2 | 4 | 25 |
| 15 | Dr.K.R. Satyanarayana | - | 0 | - | - | - | 1 | 1 |
| 16 | Sri. I. Srinivasa Raju | - | 0 | - | - | - | - | 0 |
| 17 | Sri. I.R. Pavan Kumar Varma | 1 | 1 | 1 | 1 | - | - | 4 |
| 18 | Sri. N. Harsha | - | 1 | - | - | 2 | 2 | 5 |
| 19 | Sri. V.V. M. Krishnam Raju | - | 0 | - | - | - | - | 0 |
| 20 | Sri. N. Sudheer Kumar Varma | - | 1 | - | - | - | 1 | 2 |
| 21 | Sri. S. Madhava Rao | 3 | 5 | - | 5 | - | 2 | 15 |
| 22 | Sri. G.S.V. Seshu Kumar | 1 | 2 | - | 2 | 2 | 2 | 9 |
| 23 | Sri. M. Anil Kumar | - | 2 | - | - | - | 1 | 3 |
| 24 | Sri. N. Satish | - | 3 | - | 1 | - | - | 4 |
| 25 | Sri. M. Indra Reddy | 1 | 3 | - | 1 | - | 3 | 8 |
| 26 | Sri. P. Ravi Varma | 1 | 1 | - | - | - | 2 | 4 |
| 27 | Sri. G.H. Thammi Raju | - | 1 | - | 1 | 1 | 1 | 4 |
| 28 | Sri. K.M.N.V.S.A. Siva Ram | 1 | 0 | - | - | - | - | 1 |
| 29 | Sri. K. Prasada Raju | 2 | 1 | 1 | 1 | - | 1 | 6 |
| 30 | Sri. V. Manikanth | - | 2 | - | - | - | - | 2 |
| 31 | Sri. U. Rajendra Prasad Varma | - | 0 | - | - | 1 | 1 | 2 |
| 32 | Sri. Ch.N.V.S. Swamy | - | 1 | - | 1 | 1 | - | 3 |
| 33 | Sri. V. Praveen | - | 0 | - | - | - | 1 | 1 |
| 34 | Sri. SK. R.S.M. Ali | - | 1 | 1 | - | - | - | 2 |
| 35 | Sri. SK. M.Z.M. Saqheeb Ali | - | 2 | - | - | - | - | 2 |
| 36 | Sri. K. Sunil Kumar | 1 | 1 | - | 1 | -1 | 4 | |
| 37 | Sri. K. Tarun Kumar | 3 | 5 | 4 | 3 | 1 | 2 | 18 |
| 38 | Dr. Ch. Sricharan | - | 0 | - | - | 1 | - | 1 |
| 39 | Sri. V.K. Chaitanya varma | - | 0 | - | - | - | - | 0 |
| 40 | Sri. K. Sandeep varma | - | 2 | - | - | - | - | 2 |
| 41 | Sri. M. Rajesh | 1 | 0 | - | 1 | 1 | - | 3 |
| 42 | Miss. B.S. Santhoshi | - | 1 | - | - | - | - | 1 |
| 43 | Dr. D. Shantanu | 2 | 1 | - | 2 | 1 | 2 | 8 |
| 44 | Sri. K. D. Hemanth Kumar | 1 | 0 | - | - | - | 1 | 2 |
| 45 | Sri. P.V.Ch.R.K. Santosh | - | 2 | - | - | - | - | 2 |
| 46 | Sri. M. Lohith Srikrishna Varma | - | 0 | - | - | - | - | 0 |
| 47 | Sri. B. Durga Prasad | - | 1 | - | - | - | - | 1 |
| 48 | Dr. R. Vitalram | - | 0 | - | - | 1 | - | 1 |
| 49 | Sri. R. S. Srikanth Varma | - | 0 | - | - | - | - | 0 |
| 50 | Sri.A.V.S.S.Soma Sundar | - | 2 | 1 | - | - | 2 | 5 |
2024-2025
| Sl. No. | Title of the Paper | Name of the Author's | Journal Name | ISSN No | I.F. | Vol. Issue & Page No. | Abstracted/Indexed in |
|---|---|---|---|---|---|---|---|
| 1 | Experimental investigation on optimizing wire-cut EDM process parameters of hybrid MMC (AA7475/ZrO2/Gr) using artificial neural network. | Singuru M, Chekuri RB. | Engineering Research Express. | 2631-8695 | 1.4 | 2024 Nov 5;6(4):045535. | SCIE |
| 2 | Maximizing machining efficiency and quality in AA7075/Gr/B4C HMMCs through advanced DS-EDM parameter optimization strategies. | Kantheti PR, Meena KL, Chekuri RB. | Engineering Research Express. | 2631-8695 | 1.4 | 2024 Oct 1;6(4):045504. | SCIE |
| 3 | Predictive modeling of MRR, TWR, and SR in spark-EDM of Al-4.5 Cu–SiC using ANN and GEP. | Debnath S, Sen B, Patil N, Kedia A, Mann VS, Santhosh AJ, Bhowmik A. | AIP Advances | 2158-3226 | 1.4 | 2024 Sep 1;14(9). | SCIE |
| 4 | Optimizing Supercapacitor Performance with LSCF, ST, BST, and Coconut Shell Activated Carbon. | Lurdhumary J, Princye PH, Sangeetha L, Kumar GS, Maheswari S, Umaralikhan L, Vijayan V. | Journal of New Materials for Electrochemical Systems. | 2292-1168 | 0.8 | 2024 Sep 1;27(3). | SCIE |
| 5 | Alumina-enriched sunflower bio-oil in machining of Hastelloy C-276: a fuzzy Mamdani model-aided sustainable manufacturing paradigm. | Sen B, Bhowmik A, Singh G, Mishra V, Debnath S, Zairov R, Ammarullah MI. | Scientific Reports. | 2045-2322 | 3.8 | 2024 Nov 25;14(1):29194. | SCIE |
| 6 | Minimum quantity blended bio-lubricants for sustainable machining of superalloy: An MCDM model-based study. | Sen B, Kothapalli SK, Kumar R, Abdullah I, Singh G, Santhosh AJ. | AIP Advances. | 2158-3226 | 1.4 | 2024 Jul 1;14(7). | SCIE |
| 7 | Comparison of RSM, ANN and PSO Algorithms to Predict the Porosity Level of Twin Wire Arc Sprayed Aluminium Coatings on AZ31B Magnesium Alloy. | Kumar LG, Thirumalaikumarasamy D, Karthikeyan K, Mathanbabu M, Elango E, Penmetsa RV. | International Journal of Vehicle Structures & Systems. | 0975-3540 | 0.49 | 2024 Jul 1;16(3):390-5. | Scopus |
| 8 | Experimental investigation on mechanical and tribological behavior features of gr/B4C reinforced AA7075 alloy matrix using induction stir casting | Kantheti PR, Meena KL, Chekuri RB. | Cogent Engineering. | 2331-1916 | 2.1 | 2024 Dec 31;11(1):2380806. | ESCI |
| 9 | Mechanical and Metallurgical behaviour of Aluminum/graphene nanocomposites in Fuselage applications | Kotteda TK, Kumar M, Kumar P, Gupta A, Kalidindi SR. Mechanical and | Cogent Engineering. | 2331-1917 | 2.1 | 2024 Dec 31;11(1):2324030. | ESCI |
| 10 | Optimization of wire-cut electric discharge machining process parameters for hybrid MMC(AA7475/ZrO2/gr) using Taguchi method: an experimental study | Madhavarao S, Kesava Rao VV, Rama Bhadri Raju C, Buddi T, Nemova DV, Nautiyal RD. | Cogent Engineering. | 2331-1918 | 2.1 | 2024 Dec 31;11(1):2328822. | ESCI |
| 11 | Numerical and Experimental Study of Heat Treatment via Quenching Using CFD Analysis | Horane H.P.; Naik B.N.; Durga Hemanth Kumar K.; Charkha P.; Biradar R.G.;Saini R. | SSRG International Journal of Mechanical Engineering | 2348-8360 | 2025 Feb,Volume 12 Issue 2 | Scopus | |
| 12 | Enhanced Efficiency in Duplex Stainless Steel Machining through Advanced Cryogenic Milling Techniques and Predictive Modeling | Kotteda TK, Karri VS, Barmavatu P, Radhakrishnan A, Patil SM. | Journal of Materials Engineering and Performance. | 1544-1024 | 2.2 | 2025 Mar 18:1-6. | SCIE |
| 13 | Effect of Shot Peening- Induced Microstructure and Precipitate Evolutions on the Surface Residual Stresses, Hardness, and Wear Behavior of Al 6061 Alloy | Mathi P, Prasad CR, Chembuly VS, Sai AN, Chekuri RB, Penmetsa RV, Gudaru KR. | Journal of The Institution of Engineers (India): Series D. | 2250-2130 | 2025 Jan 19:1-1. | Scopus | |
| 14 | Comprehensive Characterization of Novel Jute Fabrics with Musa Paradisiaca Leaf Agro-Waste Based Micro Cellulosic Fillers Reinforced Epoxy Composites For Lightweight Applications | Reddy MI, Sethuramalingam P, Sahu RK. | Fibers and Polymers. | 1875-0052 | 2.2 | 2025 Apr;26(4):1691-703. | SCIE |
| 15 | Effect of shot peening on microstructural features, residual stress behavior, and hardness of aluminum alloy 2014 | Reddy V, Rambabu V, Mrudula G, Prakash P, Venkatesh DJ, Mudunuri R, Satyanarayana MV. | Engineering Research Express. | 2631-8695 | 2025 Jan 24;7(1):015527. | ESCI | |
| 16 | Optimization of Output Responses in Electrical Discharge Machining of Al6063 Alloy Composites with Silicon Carbide and Fly Ash | Kotha MS, Chinta AK, Dattatreya GG, Kumar ML, Surange VG, Seenivasan M. | SAE Technical Paper; | 2688-3627 | 2025 Jan 28. | Scopus | |
| 17 | A comprehensive review on the viability of minimum quantity lubrication technology for machining difficult-to-cut alloys | Bhowmik A, Kumar R, Thulasiram R, Thatoi DN, Bisht YS, Samal P, Kotteda TK, Tejani GG, Santhosh AJ. | AIP Advances. | 2158-3226 | 1.4 | 2025 Mar 1;15(3). | SCIE |
| 18 | Microstructure investigations and optimisation of maraging steel parts for UAV applications. | Indukuri RP, Penmetsa RM, Chalamalasetti SR, Siriyala R. | International Journal of Intelligent Unmanned Systems. | 2049-6427 | 2025 Feb 13;13(1):25-37. | Scopus | |
| 19 | Optimization and modelling of WCEDM process parameters for GZR-AA7475 HMMC using GRA and Taguchi approach. | Singuru M, VVS KR, Chekuri RB.World Journal of Engineering. | World Journal of Engineering. | 1708-5284 | 2025 Feb 17;22(2):397-406. | Scopus | |
| 20 | Influence of grain structure evolution and microtexture development on hardness, residual stresses, and wear behavior of AA6061 alloy processed via cryogenic friction stir processing | Karuppasamy AK, K VR, Shireesha Y, Keshavamurthy R, Janaki DV, Chekuri RB, Satyanarayana MV. | Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. | 2041-3009 | 2.3 | 2024 Nov 28:09544089251321229. | Scopus |
2022-2023
| Sl. No. | Title of the Paper | Name of the Author's | Journal Name | ISSN No | I.F. | Vol. Issue & Page No. | Abstracted/Indexed in |
|---|---|---|---|---|---|---|---|
| 1 | Influences of external magnetic field on thermo-mechanical vibration analysis of nanocomposite beam using higher order strain gradient theory | Raju, G. Hema T., V. Vembu, P. Ramamurty Raju, G. Ganesan, and S. Narendar | International Journal of Structural Stability and Dynamics | 0219-4554 | 3.6 | 44(8), pp.955-969 | SCI |
| 2 | Thermoelastic damping in nonlocal rod using three-phase lag heat conduction model | Satish, N., S. Gunabal, K. Brahma Raju, and S. Narendar. | Journal of Thermal Stresses | 0149-5739 | 3.456 | 44(8), pp.955-969 | SCI |
| 3 | Studies on mechanical and morphological behaviors of banyan/kevlar fibers reinforced MgO particulates hybrid aliphatic epoxy composite." | Raja, Thandavamoorthy, Krishnan Venkatesh Raja, Medam Indra Reddy, Sami Al Obaid, Sulaiman Ali Alharbi, and Md Abul Kalam. | The International Journal of Advanced Manufacturing Technology | 0268-3768 | 3.4 | 44934 | SCI |
| 4 | Artificial intelligence for experimental investigation and optimal process parameter selection in PM-EDM of nimonic alloy 901 | Penmetsa, Ravi Varma, and Ashok Kumar Ilanko. | Journal of Engineering Research | 2307-1877 | 1.325 | - | SCI |
| 5 | Six DOF robot: inverse kinematics solution to path planning for intersecting pipes for welding operation and inverse Jacobian comparison. | Somasundar, Avantsa VSS, and G. Yedukondalu. | International Journal on Interactive Design and Manufacturing (IJIDeM) | 1955-2513 | 2.1 | - | SCI |
| 6 | Physical insights in thermo-elastic damping and critical magnetic field of an embedded micro/nanobeam resonator | Namburi Satish, Senthilnathan Gunabal, Kalidindi Brahma Raju, and Saggam Narendar | Mechanics of Advanced Materials and Structures | 1537-6494 | 2.8 | - | SCI |
| 7 | Analytical solution for thermo elastic damping of rotational ring resonators incorporating thermal relaxations and elastic small scales | Saggam Narendar, Namburi Satish, Senthilnathan Gunabal, Kalidindi Brahma Raju | Journal of Thermal Stresses | 0149-5739 | 3.46 | - | SCI |
| 8 | Sustainable machining of superalloy in minimum quantity lubrication environment: leveraging GEP-PSO hybrid optimization algorithm. | Sen, Binayak, Shantanu Debnath, and Abhijit Bhowmik. | The International Journal of Advanced Manufacturing Technology | 1433-3015 | 3.4 | Jan 17, 1-27 | SCI |
| 9 | Sustainable biofuel synthesis from non-edible oils: a mesoporous ZSM-5/Ni/Pt catalyst approach. | Mangesh, V. L., Tamizhdurai Perumal, S. Santhosh, Nadavala Siva Kumar, A. Vijayaraj, GSV Seshu Kumar, S. Sugumaran, G. Murali, Praveen Kumar Basivi, and Ahmed S. Al-Fatesh. | RSC advances | 2046-2069 | 3.9 | 14, no. 11 (2024): 7728-7739. | SCI |
| 10 | Preparation and investigation of mechanical behavior and characterization of AA7475/ZrO2/Gr hybrid MMC. | Madhavarao, Singuru, VVS Kesava Rao, and Rama Bhadri Raju Chekuri. | Engineering Research Express | 2631-8695 | 6.1 (2024): 015071. | ESCI/SCOPUS | |
| 11 | Ni–Fe bimetallic catalysts with high dispersion supported by SBA-15 evaluated for the selective oxidation of benzyl alcohol to benzaldehyde | Mangesh, V. L., Murali Govindarajan, Rama Bhadri Raju Chekuri, Tamizhdurai Perumal, Kumaran Rajendran, Kavitha Chandrasekaran, Nadavala Siva Kumar, Praveen Kumar Basivi, Salwa B. Alreshaidan, and Ahmed S. Al-Fatesh. | RSC advances | 2046-2069 | 3.9 | 14, no. 4 (2024): 2300-2310. | SCI |
| 12 | Optimization and modelling of WCEDM process parameters for GZR-AA7475 HMMC using GRA and Taguchi approach. | Singuru, Madhavarao, Kesava Rao VVS, and Rama Bhadri Raju Chekuri. | World Journal of Engineering | 1708-5284 | ESCI/SCOPUS | ||
| 13 | Prediction of nano metal matrix composites based on hybrid approach. | Sudheer Kumar Varma N, Rajasekhar P, Ganesan G, Sita Rama Raju K. | Lubrication Science. | 0954-0075 | 1.9 | Feb 6. | SCIE |
| 14 | Multi-Objective Parametric Optimization on WEDM of Hybrid Al6351/SiC/Gr Composites Using NSGA-II.D | Dhoria, Sneha H., K. Venkata Subbaiah, and V. Durga Prasada Rao. | Journal of The Institution of Engineers (India): Series | 2250-2122 | (2024): 1-14. | SCOPUS | |
| 15 | Optimization of process variables for shielded metal arc welding dissimilar mild steel and medium carbon steel joints. | Vijayakumar, S., A. Arunkumar, A. Pradeep, P. Satishkumar, Bharat Singh, Kalidindi Sita Rama Raju, and Vijay Kumar Sharma. | Journal of Adhesion Science and Technology | 0169-4243 | 2.3 | 38, no. 2 (2024): 185-202. | SCIE |
| 16 | Jute/basalt fabrics in microcellulosic-filled epoxy composites for lightweight applications | Reddy M.I., Sethuramalingam P., Sahu R.K., Rama Raju K.S. | Materials Chemistry and Physics | 0254-0584 | 4.3 | 2024 Jun 22:129640 | SCIE |
| 17 | ANISOTROPIC BARROW HOLOGRAPHIC DARK ENERGY MODELS IN SCALAR-TENSOR THEORY OF GRAVITATION | Sobhanbabu Y., Satyanarayana G., Swamy Chinamilli N.V.S., Rambabu P.V. | East European Journal of Physics | 2312-4539 | 1 | 2024 May 18(2):48-63 | SCIE |
| 18 | Experimental investigations on coated copper wire and annealed copper wire electrodes in wire EDM machining through a comparative assessment employing the TOPSIS technique | Prathap Varma U.D.S., Harish I., Battina N.M., Prasadaraju K., Chandu Prasad S. | Engineering Research Express | 2631-8695 | 1.5 | 2024 Jun 10.6(2) | SCIE |
| 19 | Isolation of microcrystalline cellulose from Musa paradisiaca (banana) plant leaves: physicochemical, thermal, morphological, and mechanical characterization for lightweight polymer composite applications | Reddy M.I., Sethuramalingam P., Sahu R.K. | Journal of Polymer Research | 1022-9760 | 2.6 | 2024 Apr;31(4):114. | SCIE |
| 20 | An experimental investigation on 3d printing of PETG-KF-based composites: optimization of process parameters for improved mechanical properties | Kuchampudi S.V., Meena K.L., Chekuri R.B.R. | Cogent Engineering | 2331-1916 | 2.1 | 2024 Dec 31;11(1):2379989 | SCIE |
| 21 | Study on the characteristics of novel natural fiber extracted from Coccinia grandis plant vine: a novel material for engineering applications | Raja T., Ali M.N., Shashi Kumar M.E., Vishal G.R., Manikanth V., Mohammad Soudagar M.E., Chinnathambi A., Alahmadi T.A. | International Journal of Advanced Manufacturing Technology | 0268-3768 | - | 2024 Jun 14:1-8 | SCOPUS |
| 22 | Comparison of corrosion behaviour on 18% Ni 250 grade maraging steel under weld aged condition in NaCl and H2SO4 | Indukuri R.P.K.V., Penmetsa R.M.R., Chalamalasetti S.R., Siriyala R. | International Journal of Materials Engineering Innovation | 1757-2762 | - | 2024;15(1):66-80 | SCOPUS |
| 23 | Mechanical and Metallurgical behaviour of Aluminum/graphene nanocomposites in Fuselage applications | Kotteda T.K., Kumar M., Kumar P., Gupta A., Kalidindi S.R.R. | Cogent Engineering | 2331-1916 | 2.1 | 2024 Dec 31;11(1):2324030. | SCIE |
| 24 | Optimization of wire-cut electric discharge machining process parameters for hybrid MMC(AA7475/ZrO2/gr) using Taguchi method: an experimental study | Madhavarao S., Kesava Rao V.V.S., Rama Bhadri Raju C., Buddi T., Nemova D.V., Nautiyal R.D. | Cogent Engineering | 2331-1916 | 2.1 | 2024 Dec 31;11(1):2328822 | SCIE |
| 25 | Investigation on Mechanical Properties of Fabricated Aluminium 5000 Series using Finite Element and Artificial Intelligence Methods | Gurugubelli S., Chintada V.B., Chekuri R.B.R. | International Journal of Vehicle Structures and Systems | 0975-3060 | - | 2023 Apr 1;15(2):183-6. | SCOPUS |
| 26 | Retraction Note to: Robot acquisition, control and interfacing using multimodal feedback | Ande S.K., Kuchibotla M.R., Adavi B.K. | Journal of Ambient Intelligence and Humanized Computing | 1868-5137 | - | NA | SCOPUS |
| 27 | An experimental study and parameter optimization of FSW for welding dissimilar 6061 and 7075 Al alloys | Seshu Kumar G.S.V., Kumar A., Rajesh S., Chekuri R.B.R., Ramakotaiah K. | International Journal on Interactive Design and Manufacturing | 1955-2513 | - | 2021 Mar;12(3):3909-19 | SCOPUS |
| 28 | Mechanical and Metallurgical behaviour of Aluminum/graphene nanocomposites in Fuselage applications. | Kotteda TK, Kumar M, Kumar P, Gupta A, Kalidindi SR. | Cogent Engineering | 2331-1916 | 2.1 | 2024 Dec 31;11(1):2324030 | SCIE |
| 29 | Advancements In Graphene Reinforced Metal Matrix Composites: A Comprehensive Review | Tarun Kumar Kotteda, Manoj Kumar , Pramod Kumar , Ajay Gupta , Kalidindi Sita Rama Raju | Journal of Polymer and Composites | 2321-2810 | - | 2024,12,177-189 | ESCI/SCOPUS |
| 30 | A. Development of forecast models on electrical discharge machined graphene nanoplatelets reinforced aluminum composite fabricated via stir casting route. | Kotteda TK, Kumar M, Kumar P, Gupta | Cogent Engineering | 2331-1916 | 2.1 | 2024 Dec 31;11(1):2328821. | SCIE |
| 31 | Experimental insights and micrographical investigation on graphene nanoplatelet–reinforced aluminum cast composites. | Kotteda TK, Kumar M, Kumar P. | The International Journal of Advanced Manufacturing Technology. | 0268-3768 | 2.9 | 2024 Mar;131(5):2707-18 | SCIE |
| 32 | A Comprehensive Review of the Effect of Additives on Microalgae Biodiesel Performance and Emissions | Kotteda TK, Kumar M, Kumar P. . | - | 0268-3768 | - | 2024 Mar;131(5):2707-18 | SCOPUS |
| 33 | Experimental Investigation on Mechanical and Viscoelastic properties of Kenaf, Basalt and Carbon Fiber reinforced Hybrid Epoxy Polymer Composites | Indra Reddy M., Manikanth V., Madhava Rao S., Santosh P.V.C.H.R.K. | - | 1742-6597 | - | 2024 May 1 (Vol. 2765, No. 1, p. 012006) | SCOPUS |
| 34 | A Review on Distribution of Reinforcement and tensile Strength of Aluminum Lithium Alloy based Nano Metal Matrix Composites Fabricated by STIR Casting | Ali S.M.Z.M.S., Krishna Bhaskar K., Sitarama Raju K. | - | 1742-6598 | - | 2024 May 1 (Vol. 2765, No. 1, p. 012023) | SCOPUS |
| 35 | Optimization of Process Parameters in under Water Friction Stir Welded AA2014 and AA6082 joints. | Madhavarao S., Gopalakrlshnam Raju P., Bhadri Raju Chekuri R., Vatala M., Soundaryasanthoshi B. | - | 1742-6599 | - | 2024 May 1 (Vol. 2765, No. 1, p. 012025) | SCOPUS |
| 36 | Analysis of Delamination during Drilling Process of Aramid Fibre Reinforced Polymers | Durga Prasada Rao V., Mahaboob Ali S.R.S., Ali S.M.Z.M.S., Santhoshi B.S. | - | 1742-6600 | - | 2024 May 1 (Vol. 2765, No. 1, p. 012016) | SCOPUS |
| 37 | A review on machinability and optimization of machining parameters of metal matrix composites | Kumar Kotteda T., Kumar M., Kumar P., Gupta A., Murali Krishnam Raju K.V. | - | 1742-6601 | - | 2024 May 1 (Vol. 2765, No. 1, p. 012005) | SCOPUS |
| 38 | Suitability of AA 7075 and Glass Fiber Materials for Aerospace Applications | Rama Krishna K.B., Siriyala R., Rama Murty Raju P., Rama Pavan Kumar Varma I., Harsha N. | - | 1742-6602 | - | 2024 May 1 (Vol. 2765, No. 1, p. 012001) | SCOPUS |
| 39 | A Review on Energy Storage Technologies: Current Trends and Future Opportunities | Padamurthy A., Vatala M., Kumar Gandla P., Santosh P V.C.R.K., Sheelwant A., Vemanaboina H. | - | 1742-6603 | - | 2024 May 1 (Vol. 2765, No. 1, p. 012007) | SCOPUS |
2022-2023
| Sl. No. | Title of the Paper | Name of the Author's | Journal Name | ISSN No | I.F. | Vol. Issue & Page No. | Abstracted/Indexed in |
|---|---|---|---|---|---|---|---|
| 1 | Metal matrix nanocomposites: future scope in the fabrication and machining techniques. | Kotteda, T. K., Kumar, M., Kumar, P., & Chekuri, R. B. R. | The International Journal of Advanced Manufacturing Technology. | 0268-3768 | 3.4 | PP.1-19. | SCI |
| 2 | Passenger Cars Wheel Performance Test Simulation for Service Life Evaluation: A Review. | Koppisetti, S. B., Nallu, R., & Penmetsa, R. R. | Journal of Failure Analysis and Prevention. | 1547-7029 | 1.2 | 22(4), pp.1370-1392 | SCI |
| 3 | Process Parameters Optimisation and Numerical Simulation of Laser Beam Welded Butt Joints of Maraging Steel | I.Rama Pavan Kumar Varma, P.Rama Murty Raju, Ch.Srinivasa Rao and S. Rajesh | International Journal of Automotive and Mechanical Engineering | 2180-1606 | 19(2), pp.9709-9720 | Scopus | |
| 4 | Machining parameter optimization for face milling operating in a vertical CNC milling machine using Taguchi design approach | M. S. S. Kiran Varma, Rama Bhadri Raju Chekuri, Tarun Kumar Kotteda | AIP Conference Proceedings | 1551-7616 | Vol. 2648, No. 1 | Scopus | |
| 5 | CFD Simulation of Pressure and Velocity Drop on Y-Type Fuel Injectors | Kotteda, T. K., Namburi, S. K. V., Kantheti, P. R., Penmetsa, R. V., & Chowdary, V. L | Journal of Engineering | 2314-4904 | 2.7 | 15;2022 | SCIE |
| 6 | Experimental Investigation on Metal Matrix Nanocomposite: Aluminium Alloy 6061 and 7075 with SiC and Fly Ash | Kotteda, T. K., Eshwar, D., Balakrishna, G., Kuchampudi, S. V., Prasad, B. D., & Sadasivam, S. | Journal of Nanomaterials | 1687-4129 | 10 | Scopus | |
| 7 | The effect of carbon fiber powder reinforced composite coating on mechanical properties of TIG welded black steel pipes. | Reddy, M. Indra, S. Madhavarao, Ch Rama BhadriRaju, M. Anil Kumar, and P. Ravi Varma | Material Todays Proceedings | 2214-7853 | 62:3516-21 | Scopus | |
| 8 | Taguchi-based grey relational study for multiple criterion optimization on process variables for micro Electro-chemical Machining of Inconel Super-alloy | Selvan, T. A., MNVSA Sivaram Kotha, NVS Swamy Chinamilli, GS Guru Dattatreya, S. Rajesh, P. B. Akshey, and S. Madhankumar | Material Todays Proceedings | 2214-7854 | 62:882-8 | Scopus | |
| 9 | Comparative investigation and optimization of turning process parameters using Taguchi technique in turning of Inconel 718 | Bohidar, Shailendra Kumar, Vikram Kumar Gupta, Raviteja Surakasi, MD Mohan Gift, S. Madhavarao, and Kedri Janardhana. | Material Todays Proceedings | 2214-7855 | 62:2021-5 | Scopus | |
| 10 | An experimental study and parameter optimization of FSW for welding dissimilar 6061 and 7075 Al alloys | Seshu Kumar, G. S. V., Anshuman Kumar, S. Rajesh, Rama Bhadri Raju Chekuri, and K. Ramakotaiah | International Journal on Interactive Design and Manufacturing (IJIDeM) | 1955-2513 | 2.1 | 17(1):215-23 | SCI |
| 11 | An empirical study of the impacts of parameters in micro electrochemical drilling of Al 7075 alloy composites with SiC and fly-ash | Chinamilli, NVS Swamy, P. Azhagarsamy, D. Antony Prabhu, S. Rajesh, PJ Lokesh Kumar, T. A. Selvan, A. Viswanathan, and S. Madhankumar. | Materials Today: Proceedings | 2214-7853 | 72:2464-8 | Scopus | |
| 12 | Electrical discharge Machining process variable assessment on Al 7075 mixed composite materials utilizing multi-criteria optimization method. | Kotha, MNVSA Sivaram, TJ Prasanna Kumar, U. Gobikrishnan, T. A. Selvan, S. Rajesh, and S. Madhankumar. | Materials Today: Proceedings | 2214-7854 | 72:2007-12 | Scopus |
2021-2022
| Sl. No. | Title of the Paper | Name of the Author's | Journal Name | ISSN No | I.F. | Vol. Issue & Page No. | Abstracted/Indexed in |
|---|---|---|---|---|---|---|---|
| 1 | Experimental and thermal investigation on die-sinking EDM using FEM and multi-objective optimization using WOA-CS | Chekuri, Rama Bhadri Raju, D. Eshwar, Tarun Kumar Kotteda, and RS Srikanth Varma. | Sustainable Energy Technologies and Assessments | 2213-1388 | 8 | 50:101860 | SCIE |
| 2 | Modeling and optimization of the cost controlling parameters of wire electrical discharge machining process | M N V S A Sivaram Kotha, N V S Swamy Chinamilli, Hema T Raju Gottumukkala, K Sunil Kumar | Design Engineering | 0011-9342 | - | 23:10446-62 | Scopus |
| 3 | Design and analysis of camshaft for multi cylinder engine | K.Durga Raghavulu,P.Rama Murty Raju,S.Rajesh,K.Hemanth Kumar | Journal of Engineering Science | 0377-9254 | - | - | Others |
| 4 | Analysis on Emissions and Performance of Ceramic Coated Diesel Engine Fueled with Novel Blends Using Artificial Intelligence | Kotteda, Tarun Kumar, Rama Bhadri Raju Chekuri, B. Naga Raju, Prasada Raju Kantheti, and S. Balakumar. | Advances in Materials Science and Engineering | 1687-8434 | 2.098 | 2021:1-3 | SCIE |
| 5 | Experimental Study on the Sound Absorption Properties of Finger Millet Straw, Darbha, and Ripe Bulrush Fibers | Rakesh, K. M., Ramachandracharya Srinidhi, S. Gokulkumar, K. S. Nithin, S. Madhavarao, S. Sathish, Alagar Karthick, M. Muhibbullah, and Sameh M. Osman | Advances in Materials Science and Engineering | 1687-8435 | 2.098 | 2021:1-2 | SCIE |
| 6 | Investigation on tensile behaviour of Al/Si3N4/sugarcane ash particles reinforced FSP composites | Vennila, T., Raviteja Surakasi, K. S. Raghuram, G. Ravi, S. Madhavarao, Chikkappa Udagani, and M. Sudhakar. | Material Todays Proceedings | 2214-7853 | - | 59:1266-70 | scopus |
| 7 | The compressive properties of AZ92A magnesium alloy containing titanium were studied by varying the hot-pressing and annealing temperature ranges | Raj, V. Ravi, S. Jagadeesha, KV Pradeep Kumar, Agegnehu Shara Shata, P. Sathish Kumar, S. Madhavarao, and G. Puthilibai. | Material Todays Proceedings | 2214-7853 | - | 59:1491-7 | Scopus |
| 8 | Optimization of FSW Process Parameters for Welding Dissimilar 6061 and 7075 Al Alloys using Taguchi Design | Seshu Kumar, G. S. V., Kumar Anshuman, S. Rajesh, Rama Bhadri Raju Chekuri, and K. Ramakotaiah | International Journal of Nonlinear Analysis and Applications | 0011-9342 | - | - | Others |
| 9 | Experimental and thermal investigation with optimization on friction stir welding of nylon 6A using Taguchi and microstructural analysis | Kumar, Gajula Sri Venkata Seshu, Anshuman Kumar, S. Rajesh, Rama Bhadri Raju Chekuri, and Venkatesa Prabhu Sundaramurthy | Advances in Mechanical Engineering | 1687-8132 | - | - | Scopus |
| 10 | Experimental Investigation and Optimization on Friction Stir Welding of Nylon 6A Using Taguchi and ANOVA with Microstructural Analysis | Seshu Kumar, G. S. V., Anshuman Kumar, S. Rajesh, Rama Bhadri Raju Chekuri, and Amsalu Gosu Adigo | Advances in Materials Science and Engineering | 1687-8434 | 2.1 | Vol. 13(10) 1–14 | SCIE |
| 11 | Thermoelastic damping in nonlocal rod using three-phase lag heat conduction model | N Satish, S Gunabal, K Brahma Raju, S Narendar | Journal of Thermal Stresses | 0149-5739 | 3.46 | 44(8):955-69 | SCIE |
| 12 | Effect of tungsten carbide on Al6061/SiC hybrid metal matrix composites | P Vijay, KB Raju, K Ramji, S Kamaluddin | Composite theory and practice | 2084-6096 | - | - | Web of science |
| 13 | Dynamic mechanical properties of magnetorheological polyurethane elastomers in comparison to existing antivibration rubbers | RAO, V., P. Ramamurthy Raju, and TV Subba Rao | Advances in Materials and Processing Technologies | 2374-068X | - | - | Web of science |
| 14 | The effect of carbon fiber powder reinforced composite coating on mechanical properties of TIG welded black steel pipes | Reddy, M. I., Madhavarao, S., BhadriRaju, C. R., Kumar, M. A., & Varma, P. R | Materials Today: Proceedings. | 2214-7853 | - | 62:3516-21 | Scopus |
| 15 | Investigation on Physical and Mechanical Characteristics of Date Palm Fiber Reinforced Aliphatic Epoxy Hybrid Composites. | Refaai, M. R. A., Reddy, R. M., Reddy, M. I., Khan, B., Nagaraju, V., & Kumar, S. P. | Advances in Polymer Technology | 0730-6679 | 3.1 | - | SCIE |
| 16 | CFD Simulation of Pressure and Velocity Drop on Y-Type Fuel Injectors. | Kotteda, T. K., Namburi, S. K. V., Kantheti, P. R., Penmetsa, R. V., & Chowdary, V. L. | Journal of Engineering | 2314-4904 | - | 15;2022 | Scopus |
| 17 | Process Parameters Optimisation and Numerical Simulation of Laser Beam Welded Butt Joints of Maraging Steel. | Ch, S. R., & Rajesh, S. | International Journal of Automotive and Mechanical Engineering, | 2229-8649 | - | 19(2):9709-20 | Scopus |
| 18 | Microstructure investigations and optimisation of maraging steel parts for UAV applications. | Indukuri, R. P. K. V., Penmetsa, R. M. R., Chalamalasetti, S. R., & Siriyala, R. | International Journal of Intelligent Unmanned Systems. | 2049-6427 | - | - | Scopus |
2020-2021
| Sl. No. | Title of the Paper | Name of the Authors | Journal Name | ISSN No | I.F. | Vol. Issue & Page No. | Abstracted/Indexed in |
|---|---|---|---|---|---|---|---|
| 1 | Damage Assessment on Beam-Like Structures through Mode Shapes and its Curvatures | Siva Sankara Babu Chinka, Srinivasa Rao Putti, Balakrishna Adavi | International Journal of Disaster Recovery and Business Continuity | 2005-4289 | Others | ||
| 2 | Modal testing and evaluation of cracks on cantilever beam using mode shape curvatures and natural frequencies. | Chinka, Siva Sankara Babu, Srinivasa Rao Putti, Bala Krishna Adavi. | Structures | 0969-2126 | 4.01 | Vol. 32, pp. 1386-1397 | SCIE |
| 3 | Study of Parametric Influence on Dry Sliding Wear and Corrosion Behavior of AA5754-TiB2 In Situ Composites | K. Venkatasubbaiah, K. Brahma Raju, Ramki Alamanda, Ch. Suresh, K.E. Jagadish | SAE International | 1946-3979 | 13(3):257-70 | Scopus | |
| 4 | Decanol proportional effect prediction model as additive in palm biodiesel using ANN and RSM technique for diesel engine | Kumar, A. Naresh, P. S. Kishore, K. Brahma Raju, B. Ashok, R. Vignesh, A. K. Jeevanantham, K. Nanthagopal, and A. Tamilvanan | Materials Today: Proceedings (Elsevier Publications) | 0360-5442 | 15;213:119072 | Scopus | |
| 5 | Impact Analysis on Aluminum Alloy Wheel Using ANSYS | G.Sai Priyanka,P, Ram Murthy Raju,S.Rajesh | International Journal for Research in Engineering Application & Management | 2454-9150 | Others | ||
| 6 | Design and Analysis of Honeycomb Structure Used in Different Automobile Applications | V.Leela Siva Sai,S.Rajesh,P. Rama Murty Raju | International Journal for Research in Engineering Application & Management | 2454-9150 | Others | ||
| 7 | The Method Combining Laser Welding and Induction Heating at High Temperatures was Performed | Sasidhar Gurugubelli, Rama Bhadri Raju Chekuri, T.Rajasanthosh Kumar | Design Engineering | 0011-9342 | 15:592-602 | Scopus | |
| 8 | Investigation of Mechanical Properties of Dissimilar Friction Stir Welded Joints of AA7075 and AA6061 | Chikkala Sumanth Kumar Nag, MR.G.S.V. Seshu Kumar | International Journal for Research in Engineering Application & Management | 2454-9150 | Others | ||
| 9 | Effect of SCF on automobile industry performance during sales promotional schemes | Chikkala Sumanth Kumar Nag, MR.G.S.V. Seshu Kumar | International Journal of Productivity and Performance Management | 1741-0401 | 25;70(7):1816-36 | Scopus | |
| 10 | Barriers to sustainable supply chain flexibility during sales promotions | Chirra, Sricharan, Rakesh D. Raut,Dinesh Kumar | International Journal of Production Research | 0020-7543 | 9.018 | 17;59(22):6975-93 | SCI |
| 11 | Experimental Investigation on Mechanical Properties Of Al6061 & Al7075 Nano Metal Matrix Composites | N. Harsha,Danamu Sri Surya, M N V S A Sivaram Kotha, B Durga Prasad | International Journal of Advance Scientific Research And Engineering Trends | 2456-0774 | Others | ||
| 12 | Experimental Investigation on Machinability Parameters Alluminium AL6061+AL203 using Single Point Cutter | Danamu Sri Surya, M N V S A Siva Ram kotha, N. Harsha, G H Tammi Raju | International Journal for Research in Engineering Application & Management | 2454-9150 | Others | ||
| 13 | The Development of Characterization of Silicon Carbide Reinforced Aluminium Alloy Lm 12 Metal Matrix Composite | K.Lakshmi Prasad, G.H.Tammi Raju ,M N V S A Siva Ram kotha,N. Harsha,Tarun Kumar kotteda | International Journal for Research in Engineering Application & Management | 2454-9150 | Others | ||
| 14 | Optimization and Grey Relational Analysis of En 19 A Steel And Aluminium Using Parameters of Wirecutelectric Discharge Machine | SK Akbar Saleem,K.M.N.V.S.A Siva Ram, G H Tammi Raju, N. Harsha, CH N V S Swamy | International Journal for Research in Engineering Application & Management | 2454-9150 | Others | ||
| 15 | Deployment of feature script in collaboration with cloud Computing | M. Lakshmi sramika , A. Bala krishna, Ch. Srinivasa rao, R. Aditya | International Journal of Mechanical and Production Engineering Research and Development | 2249-6890 | Scopus | ||
| 16 | Fault Tolerant Control and Reconfiguration of Mobile Manipulator | Vitalram, R.,Pathak, P. M | Journal of Intelligent & Robotic Systems | 0921-0296 | 3.129 | 101(2):34 | SCIE |
| S.No. | Name of Faculty Guided Ph.D | Name of the Student | University | Month & Year of Award |
|---|---|---|---|---|
| 1 | Dr. P. Rama Murthy Raju, Professor & Head | K. Sita Rama Raju | Jawaharlal Nehru Technological University Kakinada | November, 2015 |
| 2 | Dr. K. Brahma Raju, Professor | Bhanu Prakash. P (313407010041) | Andhra University | August, 2019 |
| 3 | Dr. K. Brahma Raju, Professor | Maneiah Dakkili (1203PH1570) | Jawaharlal Nehru Technological University Hyderabad | September, 2019 |
| 4 | Dr. K. Brahma Raju, Professor | Srinivasa Reddy Vempati | Andhra University | October, 2019 |
| 5 | Dr. V. Durga Prasad, Professor | Bindu Neeharika Vandana | Andhra University | October, 2019 |
| 6 | Dr. S. Rajesh, Associate Professor | Ch. Ram Bhadri Raju | Koneru Lakshmaiah University | August, 2019 |
| 7 | Dr. K. Brahma Raju, Professor | Balaji Kandelli | Andhra University | January, 2020 |
| 8 | Dr. K. Brahma Raju, Professor | Ramiki Alamnda | Andhra University | November, 2020 |
| 9 | Dr. A. Bala Krishna, Professor | Siva Sankara Babu Chinka | Andhra University | December, 2021 |
| 10 | Dr. P. Rama Murthy Raju, Professor & Head | Ajay Kumar Vemulapalli | Andhra University | December, 2021 |
| 11 | Dr. A. Bala Krishna, Professor | Ande Stanly Kumar | Jawaharlal Nehru Technological University Kakinada | April, 2022 |
| 12 | Dr. K. Brahma Raju, Professor | Akula Naresh Kumar | Andhra University | December, 2022 |
| 13 | Dr. P. Rama Murthy Raju, Professor & Head | Sudheer Kumar Battula | Andhra University | June, 2023 |
| 14 | Dr.S.Rajesh | G.S.V.Seshu Kumar | K L University | November,2023 |
| 15 | Dr. P. Rama Murty Raju, Professor & Head | I.R. Pavan Kumar Varma (313407010038) | Andhra University | may, 2024 |
| 16 | Dr. S. Rajesh, Associate Professor | P. Ravi Varma (1933090037) | Annamalai University | Nov, 2024 |
| 17 | Dr. Ch. Ramabhadri Raju, Associate Professor | Sunil Kumar Kothapalli (202170068) | Nirwan University | jan, 2025 |
| 18 | Dr. Ch. Ramabhadri Raju, Associate Professor | Kantheti Prasada Raju (2021700043) | Nirwan University | jan, 2025 |
| S.No. | Name of Faculty Guided Ph.D | Student Name (Regd. No) | Name of the University | Name of Guide at University | Year of Admission |
|---|---|---|---|---|---|
| 1 | Dr. A. Bala Krishna, Professor | Damera Sri Rama Chakravarthy | Andhra University | Prof. Ch. Srinivas Rao | 2013-14 |
| 2 | Dr. A. Bala Krishna, Professor | Lakshmi Sramika Muttamsetty | Andhra University | Prof. Ch. Srinivas Rao | 2013-14 |
| 3 | Dr. A. Bala Krishna, Professor | Srinivasa Reddy Mandala | Andhra University | Prof. Ch. Srinivas Rao | 2013-14 |
| 4 | Dr. K.Brahma Raju, Professor | G.Chatapathi Raju (313407020008) | Andhra University | Prof. K Venkata Subbaiah | 2013-14 |
| 5 | Dr. K.Brahma Raju, Professor | Srinivasa Rao Dokku | Andhra University | Prof. K Venkata Subbaiah | 2013-14 |
| 6 | Dr. K.Brahma Raju, Professor | Vijay Pendhota | Andhra University | Prof. K. Ramj | 2013-14 |
| 7 | Dr. K.Brahma Raju, Professor | Satish Namburi (1932060041) | Annamalai University | Dr.S.Gunabal | 2019-20 |
| 8 | Dr. K.Brahma Raju, Professor | M. Lakshmi Narasimha Swamy | Jawaharlal Nehru Technological University Kakinada | Dr. K. Dileep Kumar | 2019-20 |
| 9 | Dr.V.Durga Prasad Rao | Ch. Gopala Raju (313407020010) | Andhra University | Prof. K Venkata Subbaiah | 2013-14 |
| 10 | Dr. V.Durga Prasada Rao, Professor | Sneha H Dhoria | Andhra University | Prof. K Venkata Subbaiah | 2013-14 |
| 11 | Dr. V.Durga Prasada Rao, Professor | K. Hari Krishna | Andhra University | Prof. K Venkata Subbaiah | 2013-14 |
| 12 | Dr. P. Rama Murty Raju, Professor & Head | Purnachandra Sekhar B | Andhra University | Dr. M.V. Jagannadha Raju | 2013-14 |
| 13 | Dr. P. Rama Murty Raju, Professor & Head | Satyanarayana Gogula | Andhra University | Prof. K. Ramji | 2013-14 |
| 14 | Dr. P. Rama Murty Raju, Professor & Head | Suresh Kumar Mandru | Andhra University | Prof. Ch. Ratnam | 2013-14 |
| 15 | Dr. P. Rama Murty Raju, Professor & Head | Hema .T.Raju Gottumukkala (1933090002) | Annamalai University | Dr.V.Vembu | 2019-20 |
| 16 | Dr. P. Rama Murty Raju, Professor & Head | M. Anil Kumar (1933090018) | Annamalai University | Dr.V.Srinivasan | 2019-20 |
| 17 | Dr. S. Rajesh, Associate Professor | Venkata M K Raju V (1933090008) | Annamalai University | Dr. S.Raju | 2019-20 |
| 18 | Dr. S. Rajesh, Associate Professor | U.R. Prasad Varma (1932060022) | Annamalai University | Dr.P.Raveendiran | 2019-20 |
| 19 | Dr. K. Sita Rama Raju, Associate Professor | N.Sudheer Kumar Varma, (1933090023) | Annamalai University | Dr. P.Rajasekhar | 2019-20 |
| 20 | Dr. K.V.M. Krishnam Raju, Professor & Principal | Adina Srinivasa Vara Prasad (21022P0305) | Jawaharlal Nehru Technological University Kakinada | Dr. K. Krishna Bhaskar | 2021-22 |
| 21 | Dr. Ch. Ramabhadri Raju, Associate Professor | Kuchampudi Sandeep Varma (2021700042) | Nirwan University | Dr. Sohan Singh | 2021-22 |
| S.No. | Name of the Faculty pursuing Ph.D | Designation | Name of the University | Year of Admission |
|---|---|---|---|---|
| 1 | Ch.Gopala Raju (313407020010) | Associate Professor | Andhra University | 2013-14 |
| 2 | G.Chatapathi Raju (313407020008) | Associate Professor | Andhra University | 2013-14 |
| 3 | P.V.R.S. Padma Raju (313407010077) | Associate Professor | Andhra University | 2013-14 |
| 4 | N. Harsha (1620816410) | Assistant Professor | GITAM University | 2016-17 |
| 5 | M. Indra Reddy (PA1913002013001) | Assistant Professor | SRMIST | 2019-20 |
| 6 | Satish Namburi (1932060041) | Assistant Professor | Annamalai University | 2019-20 |
| 7 | U.R.Prasad Varma (1932060022) | Assistant Professor | Annamalai University | 2019-20 |
| 8 | Hema .T.Raju Gottumukkala (1933090002) | Assistant Professor | Annamalai University | 2019-20 |
| 9 | N.Sudheer Kumar Varma (1933090023) | Assistant Professor | Annamalai University | 2019-20 |
| 10 | Venkata M K Raju V (1933090008) | Assistant Professor | Annamalai University | 2019-20 |
| 11 | V. Praveen | Assistant Professor | Andhra University | 2020-21 |
| 12 | SK. R.S.M. Ali, (183070001-P) | Assistant Professor | Andhra University | 2020-21 |
| 13 | K.M.N.V.S.A.Sivaram (1932060012) | Assistant Professor | Andhra University | 2020-21 |
| 14 | Ch.N.V.S. Swamy (9667954063) | Assistant Professor | Andhra University | 2020-21 |
| 15 | SK. M.Z.M. Saqheeb Ali (21022P0307) | Assistant Professor | JNTU Kakinada | 2021-22 |
| 16 | Manikanth Vatala (21RD2P0331) | Assistant Professor | JNTU Anathapur | 2021-22 |
| 17 | Kuchampudi Sandeep varma (2021700042) | Assistant Professor | Nirwan University | 2021-22 |
| 18 | R. Sai Srikanth Varma (122060804506) | Assistant Professor | Gitam University | 2021-22 |
| 19 | V. Krishna Chaitanya Varma | Assistant Professor | Andhra University | 2022-23 |
The Department has established a Project Laboratory / Centres of Excellence to meet the research needs of both faculty and students (UG, PG and PhD). The Centres of Excellence are equipped with Electric resistance furnace, Rotating bending fatigue testing machine, Thermo-mechanical test rig, 3D printer, CAD station, and CNC milling and turning machines for conducting research. Also the Nanotechnology Research Centre (NRC) is established to pursue multidisciplinary research in Nano-science & Nanotechnology. All the research equipment is procured using the funds received from various research funding agencies like DST, AICTE & UGC under different schemes. The other laboratories are well-furnished for conducting experimentation or fabrication of models. The CAD lab is well equipped with the latest soft-wares like SOLID WORKS, CATIA, ANSYS, and AUTOCAD etc. A Co-ordinate Measuring Machine (CMM) with all accessories is purchased under MODROBS scheme funded by AICTE. The horizons of research can be further expanded through this additional equipment. Till date the equipment worth Rs. 82,00,000/- (approximately) have been installed for establishing the project laboratory under various schemes.
| S.No. | Laboratory | Equipment | Utilization/Purpose |
|---|---|---|---|
| 1 | Centre for Testing Biodiesels | Computerized IC Engine for testing Bio-Diesels | Utilized by UG/PG/ PhD students for doing Research on Bio-Diesels. |
| 2 | Centre for Metal Matrix Composite | 1. Rotary Fatigue testing machine 2. Electrical resistance furnace | Utilized by UG/PG/ PhD students for conducting Fatigue tests and the fabrication of composites using liquid metallurgy route. |
| 3 | Center for collaborative product development | 1. Coordinate measuring machine 2. 3D Printer 3. CAD Station. | Utilized by UG/PG/PhD students for measuring the co-ordinates of complex profiles, fabrication of parts using fused deposition modelling and Design the models. |
| 4 | Development of multilayer thin film sensor for practical monitoring of weld stress | 1. Thermo Mechanical Strain gauge tester. | Utilized by UG/PG/PhD students for strain in thermal environment. |
| 5 | Nanotechnology Research Centre | 1. UV- Visible spectroscopy 2. Fluorescence 3. Double distillation 4. Rotary evaporator 5. Ultra centrifuge 6. Sonicator 7. Microfluidics module | Utilized by UG/PG/PhD students for doing their Research on nano materials. |